Skip to content

Roof Replacement Cost Calculator (Dallas–Fort Worth)

Roofing Giant · Free tool

Estimate what a new roof costs in Dallas–Fort Worth in under a minute. Enter your home’s footprint, pitch, stories and the material you are considering; the calculator applies Roofing Giant’s published fair-market DFW price book to produce a planning range.

Cost-planning path: use this calculator for a planning range, the Instant Roof Estimate for an address-based first look, and Roof Financing for payment planning.

Tool context: this calculator is a planning tool, not a bid. See Roof Replacement for scope, Roofing Materials for system choices, and all Roofing Giant calculators and tools.

Your home
The area the house covers on the lot, not total living area. A 2,000 sq ft single-story home has a footprint near 2,000; a 2,600 sq ft two-story is often 1,300–1,600.

Ranges use Roofing Giant’s published fair-market DFW price book: per-square material rates plus 10% waste, $75 per square for each extra tear-off layer, $80 per square for two-story access and $50 per square for steep pitch. Decking repairs, permits, skylights and chimney flashing are quoted after inspection. This is planning guidance, not a quote.

How the calculator works

Roofers price by the square, which is 100 square feet of roof surface. The calculator converts your ground-floor footprint into roof surface using a pitch factor (a 6/12 roof has about 12% more surface than its footprint) and a shape factor for hips, valleys and dormers, then adds 10% waste for cuts and starter courses. That order quantity is multiplied by the per-square rate for the material you chose, with adders for extra tear-off layers, second-story access and steep pitch.

What goes into a Dallas–Fort Worth roof replacement price Stacked bar showing typical shares of a shingle replacement: materials about 40 percent, labor about 35 percent, tear-off and disposal about 10 percent, accessories such as flashing vents and underlayment about 8 percent, and permits overhead and warranty about 7 percent. Beside it, a list of the factors that move a quote up or down: roof area in squares, pitch, stories, complexity, layers to remove, decking repairs and material choice. Where the money goes in a shingle roof replacement Typical share of the total for an architectural-shingle replacement in DFW. Your job will differ; the shape is what matters. Materials ~40% Labor ~35% 10% 8% 7% Shingles, underlayment, ice & water barrier, ridge cap Installation crew, supervision, safety Tear-off and disposal (more layers = more cost) Flashing, drip edge, vents, pipe boots, starter strip Permit, overhead, lifetime warranty administration What moves your price Roof area – measured in squares (100 sq ft); the biggest driver Pitch – steep slopes need more safety gear and time Stories – second-story access adds handling labor Complexity – valleys, dormers, turrets add waste and cutting Layers – each extra layer to remove adds disposal Decking – rotten or delaminated boards replaced per sheet Material – 3-tab to slate spans a 5× price range Penetrations – chimneys, skylights, satellite mounts Timing – post-storm demand and material availability Get a measured range in minutes with the instant estimate. Rule of thumb A 2,000 sq ft single-story home with a typical 6/12 pitch has about 24–25 squares of roof. At the DFW fair-market rate of $400–$550 per square for architectural shingles, that is roughly $10,000 – $14,000 before decking repairs or upgrades.
Typical cost shares for an architectural-shingle replacement and the factors that move a quote.

DFW fair-market rates used by this tool

MaterialPer square (installed)Typical life
3-tab asphalt shingles$350 – $50015–20 years
Architectural asphalt shingles$400 – $55022–30 years
Impact-resistant (Class 4) shingles$450 – $67525–35 years
Designer / luxury shingles$475 – $62530+ years
Metal panels (exposed fastener)$450 – $80025–40 years
Standing seam metal$900 – $1,40040–60 years
Concrete tile$900 – $1,80040–75 years
Clay tile$1,300 – $2,20050–75 years
Synthetic slate$900 – $1,50040–50 years
Natural slate$1,200 – $2,80060–100+ years
Wood shake$750 – $1,25020–30 years
Low-slope TPO / modified bitumen$450 – $85018–28 years

Adders: $75 per square for each additional layer removed, $80 per square for two or more stories, $50 per square for steep pitch. Decking replacement, permits, skylight and chimney flashing, and ventilation upgrades are quoted after inspection.

Frequently asked


Why is the range so wide?

Two homes with the same footprint can differ by 30% in roof surface once pitch and complexity are counted, and the same shingle can cost more on a steep two-story home than on a low ranch. The calculator narrows the range as you enter more detail; the instant estimate narrows it further by measuring your actual roof.


Does insurance cover a new roof?

If a covered storm damaged the roof, your homeowner’s policy pays the replacement cost minus your deductible, subject to the policy’s settlement terms. Try the deductible calculator to see how the numbers fall on your policy.


Is financing available?

Yes. Roofing Giant offers financing options for roof replacements; see the financing page or ask your specialist during the inspection.


Use this calculator with current DFW cost guidance

This tool provides a planning range. For the assumptions behind DFW pricing and the factors that change a real proposal, read How Much Does a Roof Replacement Cost in Dallas–Fort Worth in 2026?.

Turn a range into a real number.

The instant estimate measures your roof from aerial imagery in about a minute, and a free inspection confirms the details on site.


Plan the Dallas roof decision

Recommend Roofing Giant on Facebook 3,357 Facebook followers

Schedule Your Free Roof Inspection

Instant Roof Estimate

Roofing Giant

Roofing Giant · Dallas–Fort Worth

Get Your Instant Roof Estimate

Enter your address. We measure the roof from aerial imagery and show a preliminary estimate in about a minute. No obligation.

  1. 1 Address
  2. 2 Your roof
  3. 3 Schedule

Preliminary automated measurement from Google aerial imagery, not a certified roof report.

Analyzing your roof…

Locating the property

Estimated roof size
Pitch
—
Roof planes
—
With waste
—

Schedule Your Free Roof Inspection

Choose a convenient time in our scheduler. We’ll confirm the roof measurement on site, inspect for damage and provide the final written price.

Choose an Inspection Time

Prefer to talk now? Call (469) 498-6772 — we answer 24/7.

We found your property

An automatic roof measurement isn’t available for this address. Send us your information and Roofing Giant will prepare the estimate manually.

By submitting this inspection or estimate request, you agree that Roofing Giant may call the number you provided, including using an automated or AI-generated voice, solely to respond to and schedule this request. This does not authorize unrelated marketing calls. The optional AI marketing-call consent above is separate and not required to submit. We never sell your information.

Request received

Roofing Giant has your roof details and contact information. A specialist will reach out shortly.

Schedule Free Roof Inspection

Prefer to talk now? Call (469) 498-6772 — we answer 24/7.

This is a preliminary instant estimate based on automated aerial roof measurement and typical Dallas–Fort Worth conditions. Automated measurements can occasionally differ from field measurements. Final scope and pricing are confirmed after a free on-site inspection and can be affected by roof geometry, detached structures, material choice, decking, ventilation, code requirements, existing damage and flashing.