Missing shingles · Lifted tabs · Storm inspections
A few shingles in the yard can be the visible part of a larger roof problem. Roofing Giant checks wind-damaged roofs across Dallas–Fort Worth, photographs the affected areas and gives you a written repair or replacement recommendation.
Signs worth having inspected
Missing or displaced shingles
Bare areas, shingles on the ground or a changed roofline can indicate that part of the covering has moved or detached.
Lifted or creased tabs
A tab may remain attached while its bond or material is damaged. Creasing, tearing or looseness needs closer inspection.
Damage at roof details
Check for visible changes at ridge caps, metal edges, vents and flashings. Water entry may also appear after wind-driven rain.
GAF describes loose and creased shingles as signs that require assessment and, when badly damaged, replacement. See its guide to wind-damaged shingles. Roof condition and installation details also matter; a photo alone does not establish the cause of every defect.
What our inspection considers
- The location and extent of visible damage across the roof slopes.
- Shingle condition, attachments and the ability to repair without damaging surrounding materials.
- Starter edges, ridge caps, flashings, vents and exposed roof layers.
- Interior or attic evidence of water entry, where accessible.
- Available replacement materials and how they fit the existing roof system.
When repair may be appropriate
If damage is limited and the surrounding roof remains serviceable, the repair may replace affected shingles or details and restore the assembly in that area. Product compatibility, safe access and the condition of the existing roof determine the scope.
Widespread damage, brittle surrounding shingles or several failing areas may justify considering a larger replacement. The number of loose shingles seen from the yard is not a reliable replacement threshold. We explain the evidence behind the recommendation and compare options in our repair-versus-replacement guide.
Document the storm and the work
Save safe photos, the date damage was noticed and invoices for any temporary protection. Our inspection photographs and written scope can support your discussion with the insurer. Coverage, deductibles and claim decisions depend on your policy and the insurer’s review.
The storm lookup tools provide weather context; a storm report does not prove damage to a specific roof. For next steps, see our claim process guide and TDI’s post-storm guidance.
Planning the replacement system
If replacement is needed, review the complete system, including starter, attachments, ridge cap, flashing and ventilation. Compare architectural shingles and other roofing materials. Wind warranty terms are product- and installation-specific; no roof is storm-proof.
Common questions
Can a few missing shingles be repaired?
Often, if compatible materials are available and the surrounding roofing is in suitable condition. An inspection establishes the extent of damage and whether the repair can be performed properly.
Does wind damage always mean a full replacement?
No. The recommendation depends on the extent of damage, the condition of the remaining roof and the feasibility of repair. There is no universal shingle-count rule.
Should I put loose shingles back myself?
Stay off the roof. Keep safe ground-level photos and ask a roofing professional to inspect the damaged area and its attachments.
Does a wind warranty cover every storm loss?
No. A wind warranty has specific covered conditions, exclusions and installation requirements. Insurance coverage is a separate question. Check the applicable written documents.